Product Disclaimers & Guarantees

^®Silicone 1 is a trademark of Henkel Corporation.

^®Silicone 2 is a trademark of Henkel Corporation.

^®Max Shield is a trademark of Henkel Corporation.

Resists mold/mold resistant: Cured sealant is resistant to stain-causing mold and mildew. Regular cleaning of the cured sealant is required however, as soap or other residue can cause secondary mold and mildew growth. Do not touch for 24 hours.

7-year mold-free product protection: Cured sealant is resistant to stain causing mold and mildew. Regular cleaning of the cured sealant is required, however, as soap and other residue can cause secondary mold and mildew growth.

10-year mold-free product protection: Cured sealant is resistant to stain-causing mold and mildew. Regular cleaning of the cured sealant is required however, as soap or other residue can cause secondary mold and mildew growth. Do not touch for 24 hours.

Lifetime year mold-free product protection: Cured sealant is resistant to stain-causing mold and mildew. Regular cleaning of the cured sealant is required however, as soap or other residue can cause secondary mold and mildew growth. Do not touch for 24 hours.

Same-day water-ready: Exposure to water possible in as little as 12 hours with bead size max 3/16″, temperature min 65°F and humidity min 50%. Do not touch or clean sealant for 24 hours.

Same-day rain-ready: Exposure to water possible in as little as 12 hours with bead size max 3/16″, temperature min 65°F and humidity min 50%. Do not touch or clean sealant for 24 hours.

30-minute water-ready: Exposure to water possible in as little as 30 minutes with bead size maximum of 3/16″, temperature minimum 65° F, and humidity minimum 50 percent. Otherwise, caulk should not be exposed to water for eight hours. Do not touch or clean caulk for 24 hours.

30-minute rain-ready: Exposure to water possible in as little as 30-min with bead size max of 3/16″, temperature minimum of 65° F, and humidity minimum 50 percent. Otherwise, sealant should not be exposed to water for eight hours. Do not touch for 24 hours unless applying paint.

60-minute paint-ready: Sealant can be spray-painted immediately and brush- and roller-painted in as little as 60 minutes with bead size max 3/16″, temperature minimum of 65°F, and humidity minimum 50 percent. Otherwise, sealant should not be painted for 60-minutes. Apply paint with reduced applicator pressure to avoid disturbing the sealant. Paintable Silicone Sealant works well with most water-based acrylic paints. Sealant is not recommended with oil-based paints. If oil-based paints are used, test apply an acrylic primer and paint in a small, inconspicuous area.

45-minute paint-ready: Sealant can be painted in as little as 45 minutes with bead size max 3/16″, temperature min 65°F & humidity min 50%. Otherwise, sealant should not be painted for 3 hours or exposed to water for 24 hours. Do not touch for 24 hours, unless applying paint. Apply paint with reduced applicator pressure to avoid disturbing the sealant. Clean up with a damp disposable cloth, do not rinse.

Paint-ready in as little as 1 hour (60-minute paint-ready): Sealant can be painted in as little as 60 minutes with bead size max 3/16″, temperature min 65°F & humidity min 50%. Otherwise, sealant should not be painted for 2 hours or exposed to water for 8 hours. Do not touch for 24 hours, unless applying paint. Apply paint with reduced applicator pressure to avoid disturbing the sealant. Compatible with most latex and oil-based paints.

40% more flexibility than Class 25 sealants: Based on comparison with products that meet the flexibility performance of ASTM C-920 Class 25 test requirements.

100% more flexibility than class 25 sealants: Based on comparison with products that meet the flexibility performance of ASTM C-920 Class 25 test requirements.

5X stronger adhesion: Based on comparison of this sealant and GE Silicone 1* sealant using ASTM C794 Peel Adhesion test.

7X stronger adhesion: Based on comparison of this sealant and GE Silicone 1* sealant using ASTM C794 Peel Adhesion test.

Seals up to 2-inch gaps: Use backer rod for gaps deeper than 1/2″.

Seals up to 3-inch gaps: Use backer rod for gaps deeper than 1/2″.

Stretches over 600%: Based on ASTM C-920, TYPE-S, NS, CLASS 25, analysis, product can span gaps of up to 2″ wide and 1/2″ deep with over 600% stretch and 25% joint movement.

Stretches over 800%: Based on ASTM C-920, TYPE-S, NS, CLASS 35 analysis, product can span gaps of up to 3″ wide and 1/2″ deep with over 800% stretch and 35% joint movement.

Best-In-Class: Based on comparison of publicly available manufacturers’ specifications, product meets or exceeds the flexibility performance of any ASTM C-920, Class 25 or lower commercial Paint Projects siliconized acrylic sealant.

Limited Lifetime Guarantee: Manufacturer warrants that this product, when used as directed, will meet the above specifications for as long as you own your home. If not satisfied, return proof of purchase for refund. This is the sole and exclusive remedy and Manufacturer shall not be liable for any damages in excess of the purchase price. This warranty is in lieu of all other warranties, express or implied, including any warranty of merchantability or fitness.

50-year limited durability guarantee: Manufacturer warrants that this product, when used as directed, will meet the above specifications for as long as you own your home. If not satisfied, return proof of purchase for refund. This is the sole and exclusive remedy and Manufacturer shall not be liable for any damages in excess of the purchase price. This warranty is in lieu of all other warranties, express or implied, including any warranty of merchantability or fitness..

60-year limited durability guarantee: Manufacturer warrants that this product, when used as directed, will meet the above specifications for as long as you own your home. If not satisfied, return proof of purchase for refund. This is the sole and exclusive remedy and Manufacturer shall not be liable for any damages in excess of the purchase price. This warranty is in lieu of all other warranties, express or implied, including any warranty of merchantability or fitness.

*Weatherproof claim is only valid if foam is protected against UV exposure. It’s recommended to cover with paint, stain, sealant, plaster or mortar.