DIY sealing made simple.

How to Apply in 5 Easy Steps

1. Remove dirt, grease, moisture, soap residue & old caulk from areas to be sealed.Tip: Use backer rod for gaps larger than ⅜” (W) x 1/4” (D) (9.5mm x 6mm)
2. Remove cap & cut nozzle with the GE Cartridge Opener and Smoothing Tool to obtain desired bead size.
3. Apply caulk and then smooth into gap. Sealant should be tooled within 5 to 10 minutes after application. Do not use soapy water or oil as a tooling aid.Tip: Sealant beads should be no thicker than ½” (12.7mm) or thinner than ⅛” (3.2mm)
4. Clean up excess wet caulk with a damp sponge before it skins over. Excess dried caulk must be cut or scraped away. Clean hands and tools with warm water and soap.
5. Allow to dry 30 minutes before painting with latex paint or 24 hours if using oil-based paints. Allow a minimum of 24 hours before exposing to water.