DISCLAIMER: ANY SALE OF PRODUCTS OR DELIVERY OF CUSTOMER SUPPORT AND ADVICE BY HENKEL CORPORATION. AND/OR ITS AFFILIATES (“HENKEL”) IS MADE EXCLUSIVELY UNDER HENKEL’S STANDARD CONDITIONS OF SALE which are included in the applicable sales agreements, printed on the back of acknowledgments and invoices, or available upon request. HENKEL MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OF ITS PRODUCTS IN ANY CUSTOMER’S APPLICATION. Each customer should determine the suitability of Henkel’s materials for the customer’s particular use through appropriate testing and analysis. Statements regarding possible or suggested use of any material, product, service or design is not intended, nor should be construed, to grant any license under or induce infringement of any patent or other intellectual property. See product packaging for complete performance and warranty information.
GE is a registered trademark of General Electric Company and is used under trademark license by Henkel.
*Silicone 1, Silicone 2 and Max are trademarks of Henkel Corporation
†Estimates of comparative U.S. sales based on analysis of available 2018 industry reports and retail sales data.
42% have bought the wrong sealant – Source: Path to Purchase: SFW Proprietary Research Study, 646 respondents, MOE 3.88%
1Fully cured sealant is resistant to stain-causing mold and mildew. Regular cleaning of sealant is required, however, as soap and other residue may cause secondary mold and mildew growth.
2Based on comparison with products that meet the flexibility performance of ASTM C-920 Class 25 test requirements.
3Based on comparison of this sealant and GE Silicone 1*sealant using ASTM C794 Peel Adhesion test.
4Exposure to water possible in as little as 30 minutes with bead size max 3/16″, temperature min 65°F and humidity min 50%. Otherwise, sealant should not be exposed to water for 8 hours. Do not touch or clean sealant for 24 hours
5Sealant can be painted in as little as 30 minutes with bead size 3/16″, temperature min 65°F & humidity min 50%. Otherwise, seals should not be painted for 2 hours. Spray paint can be applied immediately. Apply paint with reduced applicator pressure to avoid disturbing the caulk. Not recommended with oil-based paints. If oil-based paints are used, first test by applying an acrylic primer and paint in a small, inconspicuous area.
6Based on comparison of publicly available manufacturing specifications, white product meets or exceeds the flexibility of any ASTM C-920, CLASS 12.5 or lower commercial Kitchen & Bath siliconized acrylic sealant, and clear product meets or exceeds the flexibility of any ASTM C-920, CLASS 35 or lower commercial Kitchen & Bath siliconized acrylic sealant.
7Based on ASTM C-920, TYPE-S, NS, CLASS 12.5 analysis, product can span gaps of up to 1/2″ x 1/2″ with over 500% stretch and 12.5% joint movement.
8Based on ASTM C-920, TYPE-S, NS, CLASS 35 analysis, product can span gaps of up to 3″ wide and 1/2″ deep with over 800% stretch and 35% joint movement.
9Use backer rod for gaps deeper than 1/2″.
10Manufacturer warrants that this product, when handled and used as directed, will meet the above specifications for the specified number of years. If not satisfied, return proof of purchase for refund. This is the sole and exclusive remedy and Manufacturer shall not be liable for any damages in excess of the purchase price. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS.
11Stated times are typical results attained within the limits of several factors that include bead size, temperature and humidity levels. See product packaging for details.
12Based on ASTM C-920, TYPE-S, NS, CLASS 25 analysis, product can span gaps of up to 2″ wide and 1/2″ deep with over 600% stretch and 25% joint movement.
©2021 Henkel Corporation. All Rights Reserved.