Seal & Fill Multi-Purpose Window & Door Caulk

Ideal for putting the finishing touch on window, door, siding and trim paint projects, GE Seal & Fill Multi-Purpose Window & Door Caulk is easy to use and ready for painting in just 30 minutes. This low-odor caulk forms a durable, water- and mold-resistant seal to ensure long-lasting results.

Adheres to: Common building materials including most metals and woods, aluminum, brick, stone, stucco, masonry, cement board, glass, porcelain, ceramic tile, drywall, plaster, vinyl siding, PVC, fiberglass, and painted surfaces.

For additional information, see product label.

1. Remove dirt, grease, moisture, soap residue & old caulk from area to be sealed. Use backer rod for gaps larger than 3/8″ (W) x 1/4″ (D). A width to depth ratio of 2:1 should be maintained.
2. Cut nozzle to obtain desired bead size.
3. PIERCE INNER FOIL SEAL.
4. Using caulk gun, apply caulk into gap. Apply above 40°F (5°C).
5. Smooth or “tool” the caulk into gap within 15 minutes.
6. Clean up excess wet caulk with a damp sponge before it skins over. Excess dried caulk must be cut or scraped away. Clean hands and tools with warm water and soap.
7. Allow to dry 30 minutes before painting with latex paint or 24 hours if using oil-based paints. Allow a minimum of 24 hours before exposing to water.

How to Seal Exterior Window Trim to Last

Learn how to seal exterior window trim with GE-branded silicone sealant to keep your home protected against rain, snow, wind and other harsh weather conditions.

×

How to Seal Around the Exterior of a Door Properly

Knowing how to seal a door frame will help keep water, rain, drafts and pests out of your home. Learn how to seal around an exterior door with silicone sealant.

×

Exceeds ASTM C-834, Type-OP, NS, Grade -18°C requirement