DISCLAIMER: ANY SALE OF PRODUCTS OR DELIVERY OF CUSTOMER SUPPORT AND ADVICE BY HENKEL CORPORATION. AND/OR ITS AFFILIATES (“HENKEL”) IS MADE EXCLUSIVELY UNDER HENKEL’S STANDARD CONDITIONS OF SALE which are included in the applicable sales agreements, printed on the back of acknowledgments and invoices, or available upon request. HENKEL MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OF ITS PRODUCTS IN ANY CUSTOMER’S APPLICATION. Each customer should determine the suitability of Henkel’s materials for the customer’s particular use through appropriate testing and analysis. Statements regarding possible or suggested use of any material, product, service or design is not intended, nor should be construed, to grant any license under or induce infringement of any patent or other intellectual property. See product packaging for complete performance and warranty information.
GE is a registered trademark of General Electric Company and is used under trademark license by Henkel.
*Silicone 1, Silicone 2 and Max are trademarks of Henkel Corporation.
†Estimates of comparative U.S. sales based on analysis of available 2018 industry reports and retail sales data.
1Fully cured sealant is resistant to stain-causing mold and mildew. Regular cleaning of sealant is required, however, as soap and other residue may cause secondary mold and mildew growth.
2Exposure to water possible in as little as 12 hours with bead size max 3/16″, temperature min 65°F and humidity min 50%. Do not touch or clean sealant for 24 hours.
3Based on comparison with products that meet the flexibility performance of ASTM C-920 Class 25 test requirements.
4Based on comparison of this sealant and GE Silicone 1* sealant using ASTM C794 Peel Adhesion test.
5Exposure to water possible in as little as 30 minutes with bead size max 3/16″”, temperature min 65°F and humidity min 50%. Otherwise, sealant should not be exposed to water for 8 hours. Do not touch or clean sealant for 24 hours
6Sealant can be painted in as little as 30 minutes with bead size 3/16″, temperature min 65°F & humidity min 50%. Otherwise, seals should not be painted for 2 hours. Spray paint can be applied immediately. Apply paint with reduced applicator pressure to avoid disturbing the caulk. Not recommended with oil-based paints. If oil-based paints are used, first test by applying an acrylic primer and paint in a small, inconspicuous area.
7Based on comparison of publicly available manufacturing specifications, white product meets or exceeds the flexibility of any ASTM C-920, CLASS 12.5 or lower commercial Kitchen& Bath siliconized acrylic sealant, and clear product meets or exceeds the flexibility of any ASTM C-920, CLASS 35 or lower commercial Kitchen & Bath siliconized acrylic sealant.
8Based on ASTM C-920, TYPE-S, NS, CLASS 12.5 analysis, product can span gaps of up to 1/2″ x 1/2″ with over 500% stretch and 12.5% joint movement.
©2021 Henkel Corporation. All Rights Reserved.