Project Type: Seal & Paint

Interior Fill Acrylic Putty

5.5 oz
 
White
  • Easy to use
  • Paintable
  • Formulated for use on walls, trim, and baseboards
  • 15-minute speed dry
  • Ideal for filling small holes and cracks
  • Use with GE’s trusted DIY tools for the perfect outcome

†See Product Disclaimers page for important details


Where To Buy Where To Buy

Interior Fill Wall Repair is a high-performance acrylic putty designed for quick and reliable DIY repairs. Perfect for filling small holes and cracks, it works seamlessly on walls, trim, and baseboards for lasting results across a variety of surfaces. Its fast-drying formula is ready for paint in just 15 minutes, making it an excellent choice for touch-ups and minor fixes. Backed by a lifetime guarantee.

Adheres to: Wood, plaster, drywall, wallboard, masonry, brick and concrete.

For additional information, see product label.

Instructions

  1. Knead tube well before using.
  2. Remove cap and trim tip to desired bead size with the GE Cartridge Opener and Smoothing tool.
  3. Squeeze into the opening and remove excess with a putty knife and/or damp cloth immediately after application.
  4. For deeper holes or cracks, apply 1/8″ (3mm) layers, allowing each to dry thoroughly before applying the next.
  5. Allow to dry (approximately 15 minutes for a 1/16″ – 1/8″ (2-3mm) depth/width fill before sanding with 120 grit sandpaper.
  6. Remove sanding dust and prime before painting.
  7. Soap & water clean-up.

For products produced by Henkel Corporation, please use the UPC Code. You can click on the corresponding UPC code below to access the SDS.. 

Color UPC Code
White 3019891

Reviews

Painter’s Pro Quick Dry Siliconized Acrylic

10 oz
 
  • Paint-ready in 30 minutes†
  • Mold-resistant caulk†
  • 50-year limited durability guarantee†
  • Strong adhesion and flexibility
  • Exceeds ASTM C-834, Type-OP, NS, Grade -18°C requirement
  • Easy to apply
  • Low odor
  • Easy water cleanup

†See Product Disclaimers page for important details


Where To BuyWhere To Buy Where To Buy

GE Painter’s Pro Quick Dry Siliconized Acrylic is an advanced grade caulk that is paint-ready in as little as 30 minutes for a quicker workflow. GE Painter’s Pro Quick Dry Siliconized Acrylic caulk is ideal for interior and exterior projects that require durable flexibility. The formulation offers excellent adhesion to a wide variety of building materials. GE Painter’s Pro Quick Dry Siliconized Acrylic guns out effortlessly, tools smoothly, and cleans-up easily with soap and water. This paint-friendly caulk resists cracking with most latex and oil paints. Cured caulk is resistant to stain-causing mold and mildew growth†, creating a durable seal that is resilient and tough for long-lasting professional results.

Adheres to: Common building materials including most metals and woods, aluminum, brick, stone, stucco, masonry, cement board, glass, drywall, plaster, vinyl siding, PVC, fiberglass, and painted surfaces.

For additional information, see product label.

  • Remove dirt, grease, moisture, soap residue & old caulk from area to be sealed. Use backer rod for gaps larger than 3/8″ (W) x 1/4″ (D). A width to depth ratio of 2:1 should be maintained.
  • Cut nozzle to obtain desired bead size.
  • PIERCE INNER FOIL SEAL.
  • Using caulk gun, apply caulk into gap. Apply above 40°F (5°C).
  • Smooth or “tool” the caulk into gap within 15 minutes.
  • Clean up excess wet caulk with a damp sponge before it skins over. Excess dried caulk must be cut or scraped away. Clean hands and tools with warm water and soap.
  • Allow to dry 30 minutes before painting with latex paint or 24 hours if using oil-based paints. Allow a minimum of 24 hours before exposing to water.
View all How-To Videos

Exceeds ASTM C-834, Type-OP, NS, Grade -18°C test requirements

For products produced by Henkel Corporation, please use the UPC Code. You can click on the corresponding UPC code below to access the SDS.. 

Color UPC Code
White 028756954552
Clear 028756954514
Painter’s Pro Quick Dry Siliconized Acrylic
30-minute
50-year
Waterproof Water-resistant / Waterproof
Mold-resistant1 Mold-Free Product Protections
•• Flexibility
Paintable
Durability Guarantee
Low Odor
Will Not Blemish Most High-End Metals
Available in Squeeze Tube
Image of a siliconized acrylic caulk tube by Painter's Pro, highlighting quick dry and paintable features.
Painter’s Pro Quick Dry Siliconized Acrylic		Image of GE Painters Seal & Paint siliconized acrylic latex caulk in a white tube, for windows, doors, and molding.
Painter’s Caulk		Image of a siliconized acrylic caulk tube from Painter's Pro Seal & Paint series.
Painter’s Pro Siliconized Acrylic Caulk
Paint-Ready Time 30-minute30-minute1-hour
Durability Guarantee 50-year40-year50-year
Mold-Free Product Protections Mold-resistant1Mold-resistant1
Paintable


Swipe to scroll the table horizontally

Reviews

Painter’s Pro Siliconized Acrylic Caulk

10 oz
 
  • Paintable
  • Mold-resistant caulk†
  • Durable and flexible
  • 50-year limited durability guarantee†
  • Easy to apply
  • Exceeds ASTM C-834, Type-OP, NS, Grade -18°C requirement
  • Low odor
  • Easy water cleanup

†See Product Disclaimers page for important details


Where To BuyWhere To Buy Where To Buy

GE Painter’s Pro Siliconized Acrylic is an advanced grade caulk ideal for decorative paint projects. GE Painter’s Pro Siliconized Acrylic is paint-friendly. It guns out effortlessly, tools smoothly and cleans-up easily with soap and water. This formulation resists cracking and offers dependable adhesion and flexibility for interior and exterior projects. Fully cured caulk is resistant to stain-causing mold and mildew growth†. GE Painter’s Pro Siliconized Acrylic creates durable seals that are resilient and tough for long-lasting professional results.
Adheres to: Common building materials including most metals and woods, aluminum, brick, stone, stucco, masonry, cement board, glass, drywall, plaster, vinyl siding, PVC, fiberglass, and painted surfaces.

For additional information, see product label.

  1. Remove dirt, grease, moisture, soap residue & old caulk from area to be sealed. Use backer rod for gaps larger than 3/8″ (W) x 1/4″ (D). A width to depth ratio of 2:1 should be maintained.
  2. Cut nozzle to obtain desired bead size.
  3. PIERCE INNER FOIL SEAL.
  4. Using caulk gun, apply caulk into gap. Apply above 40°F (5°C).
  5. Smooth or “tool” the caulk into gap within 15 minutes.
  6. Clean up excess wet caulk with a damp sponge before it skins over. Excess dried caulk must be cut or scraped away. Clean hands and tools with warm water and soap.
  7. Allow to dry 60 minutes before painting with latex paint or 24 hours if using oil-based paints. Allow a minimum of 24 hours before exposing to water.
View all How-To Videos

Exceeds ASTM C-834, Type-OP, NS, Grade -18°C requirement

For products produced by Henkel Corporation, please use the UPC Code. You can click on the corresponding UPC code below to access the SDS.. 

Color UPC Code
White 28756954576
Clear 28756954538
Painter’s Pro Siliconized Acrylic Caulk
1-hour
50-year
Waterproof Water-resistant / Waterproof
Mold-resistant1 Mold-Free Product Protections
•• Flexibility
Paintable
Durability Guarantee
Low Odor
Will Not Blemish Most High-End Metals
Available in Squeeze Tube
Image of a siliconized acrylic caulk tube from Painter's Pro Seal & Paint series.
Painter’s Pro Siliconized Acrylic Caulk		Image of GE Painters Seal & Paint siliconized acrylic latex caulk in a white tube, for windows, doors, and molding.
Painter’s Caulk		Image of a siliconized acrylic caulk tube by Painter's Pro, highlighting quick dry and paintable features.
Painter’s Pro Quick Dry Siliconized Acrylic
Paintable
Paint-Ready Time 1-hour30-minute30-minute
Durability Guarantee 50-year40-year50-year


Swipe to scroll the table horizontally

Reviews

Painter’s Caulk

10.1 oz
 
  • Flexible
  • 40-year limited durability guarantee†
  • Paintable
  • Water resistant
  • Easy application & tooling
  • Mold resistant†
  • Low odor

†See Product Disclaimers page for important details


Where To Buy Where To Buy

Painter’s caulk is an all-purpose siliconized acrylic latex ideal for both indoor and outdoor paint projects.

Adheres to: common building materials including most woods, composites, brick, stone, stucco, masonry, cement board, drywall, plaster, vinyl siding, PVC, fiberglass, and painted surfaces.

For complete product details, see packaging label in the “Downloads” tab.
​†See Product Disclaimers page for important details.

  1. Remove dirt, grease, moisture, soap residue & old sealant from area to be sealed.  Use backer rod for gaps larger than 1/2″ x 1/2″.
  2. Cut nozzle to obtain desired bead size.
  3. Using caulk gun, apply caulk into gap. Apply above 40°F (5°C).
  4. Smooth with a gloved finger or “tool” the caulk into gap within 3-5 minutes.
  5. Clean-up with a damp, disposable cloth; do not rinse.
  6. Protect from moisture for at least 24 hours for proper drying.
View all How-To Videos
Exceeds ASTM C-834 Type-OP, NS, Grade 0°C test requirements.

For products produced by Henkel Corporation, please use the UPC Code. You can click on the corresponding UPC code below to access the SDS.. 

Color UPC Code
White 028756957881
Painter’s Caulk
30-minute
40-year
Water-Resistant Water-resistant / Waterproof
30-minute Rain Ready Time
• Flexibility
Paintable
Durability Guarantee
Low Odor
Will Not Blemish Most High-End Metals
Available in Squeeze Tube
Image of GE Painters Seal & Paint siliconized acrylic latex caulk in a white tube, for windows, doors, and molding.
Painter’s Caulk		Image of a siliconized acrylic caulk tube from Painter's Pro Seal & Paint series.
Painter’s Pro Siliconized Acrylic Caulk		Image of a siliconized acrylic caulk tube by Painter's Pro, highlighting quick dry and paintable features.
Painter’s Pro Quick Dry Siliconized Acrylic
Paint-Ready Time 30-minute1-hour30-minute
Durability Guarantee 40-year50-year50-year
Water-resistant / Waterproof Water-ResistantWaterproofWaterproof
Flexibility •••••
Durability Guarantee
Paintable


Swipe to scroll the table horizontally

Reviews