Performance: Not Paintable
Metal Silicone 2® Sealant
- 100% silicone
- 100% waterproof & weatherproof
- 10-year mold-free product protection†
- Permanently flexible
- Shrink & crack-proof
- Resists UV degradation
- 30-minute rain-ready†
- Will not discolor most high-end metal finishes like chrome, bronze & nickel
- Adheres to porous materials & wet or dry surfaces
- Lifetime guarantee†
- Non-paintable
†See Product Disclaimers page for important details
Metal Silicone 2 sealant is a high-performance, 100% silicone and 100% waterproof sealant ideal for repairing and sealing sheds, siding, gutters, recreational vehicles, roofs and vents. This 30-minute rain-ready formula is metallic gray in color and offers excellent adhesion and permanent flexibility with 10-year mold-free product protection to help resist mold and mildew growth. Backed by a lifetime guarantee.
Adheres to: most metals, stainless steel, aluminum, copper, composites, brick, stone, stucco, concrete, cement, masonry, cement board, most woods, glass, ceramic & porcelain tile, drywall, plaster, vinyl siding, PVC, fiberglass & painted surfaces
For additional information, see product label.
- Remove dirt, grease, moisture, soap residue & old sealant from area to be sealed. Use backer rod for gaps larger than 1/2″ x 1/2″.
- Cut nozzle to obtain desired bead size.
- PIERCE INNER FOIL SEAL.
- Using caulk gun, apply sealant into gap. Smooth with a gloved finger or “tool” the caulk into gap.
- Wipe hands & tools thoroughly before washing.
- Allow 30 minutes before exposing sealant to water.
Meets Fed Spec ASTM C-920, Type-S, NS, Class 25, Use NT, M, G, A & O test requirements Fed Spec TT-S-00230C; TT-S-001543A
For products produced by Henkel Corporation, please use the UPC Code. You can click on the corresponding UPC code below to access the SDS..
| Color | UPC Code |
|---|---|
| Metallic Gray | 28756956679 |
| Metal Silicone 2® Sealant |  Gutter Silicone 2® Sealant |  Concrete Silicone 2® Sealant |  Advanced Silicone 2® Window & Door Sealant | |
|---|---|---|---|---|
| Water-ready Time | 30-minute | 30-minute | 30-minute | 30-minute |
| Mold-Free Product Protections | 10-year | 10-year | 10-year | 10-year |
| Joint Movement | 25% | 25% | 25% | 35% |
| Low Odor | ||||
| Will Not Blemish Most High-End Metals | ||||
| Available in Squeeze Tube |
Swipe to scroll the table horizontally
Reviews
Window & Door Foam
- Seals gaps & cracks around windows & doors without causing frames to bow
- Creates airtight & water-resistant seals
- Helps save energy by reducing drafts
- High R-5 insulating value
- Weatherproof
- Lifetime guarantee†
†See Product Disclaimers page for important details
Seal gaps and cracks around window and door frames with GE-branded Window & Door insulating foam, a low-pressure and low-expansion foam that remains waterproof with an airtight seal.
- Wear safety goggles, gloves, respiratory protection, and protective clothing. Protect surrounding areas with drop cloths.
- Shake can vigorously for one minute.
- Screw straw dispenser trigger completely onto can valve. Use caution to avoid activating the valve.
- To become familiar with product, test on experimental surface. Invert can and slowly depress the trigger to dispense the foam. Continue use in an inverted orientation.
- Fill rough openings approximately 1/3 full to allow for expansion. Release trigger 5 seconds before the end point, but keep straw end moving.
- For deep section application, allow the first layer of foam to cure before applying a second layer. Do not disturb uncured foam. See typical product information on label for times.
- Trim cured foam with a sharp knife or sand as needed. Foam exposed to sunlight must be painted or stained.
For products produced by Henkel Corporation, please use the UPC Code. You can click on the corresponding UPC code below to access the SDS..
| Color | UPC Code |
|---|---|
| White | 028756957386 |
Related Products
Reviews
Gaps & Cracks
- Seals small gaps & cracks up to 1 inch
- Repels water & helps prevent mold & rot
- Blocks rodents & insects
- High R-5 insulating value
- Lifetime guarantee†
†See Product Disclaimers page for important details
Seal small gaps and cracks up to 1 inch with GE-branded Gaps and Cracks insulating foam, offering a water-resistant and airtight seal to keep out water and reduce drafts.
- Wear safety goggles, gloves, respiratory protection, and protective clothing. Protect surrounding areas with drop cloths.
- Shake can vigorously for one minute.
- Screw straw dispenser trigger completely onto can valve. Use caution to avoid activating the valve.
- To become familiar with product, test on experimental surface. Invert can and slowly depress the trigger to dispense the foam. Continue use in an inverted orientation.
- Fill rough openings approximately 1/3 full to allow for expansion. Release trigger 5 seconds before the end point, but keep straw end moving.
- For deep section application, allow the first layer of foam to cure before applying a second layer. Do not disturb uncured foam. See typical product information on label for times.
- Trim cured foam with a sharp knife or sand as needed. Foam exposed to sunlight must be painted or stained.
For products produced by Henkel Corporation, please use the UPC Code. You can click on the corresponding UPC code below to access the SDS..
| Color | UPC Code |
|---|---|
| White | 028756957379 |
Related Products
Reviews
Big Gaps & Cracks
- Expands & seals gaps greater than 1 inch
- Creates an airtight & water-resistant seal
- Helps save energy by reducing drafts
- High R-5 insulating value
- Lifetime guarantee†
†See Product Disclaimers page for important details
Fill gaps and cracks larger than 1 inch with GE-branded Large Gaps insulating foam, offering a water-resistant and airtight seal to keep out water and reduce drafts.
- Wear safety goggles, gloves, respiratory protection, and protective clothing. Protect surrounding areas with drop cloths.
- Shake can vigorously for one minute.
- Screw straw dispenser trigger completely onto can valve. Use caution to avoid activating the valve.
- To become familiar with product, test on experimental surface. Invert can and slowly depress the trigger to dispense the foam. Continue use in an inverted orientation.
- Fill rough openings approximately 1/3 full to allow for expansion. Release trigger 5 seconds before the end point, but keep straw end moving.
- For deep section application, allow the first layer of foam to cure before applying a second layer. Do not disturb uncured foam. See typical product information on label for times.
- Trim cured foam with a sharp knife or sand as needed. Foam exposed to sunlight must be painted or stained.
For products produced by Henkel Corporation, please use the UPC Code. You can click on the corresponding UPC code below to access the SDS..
| Color | UPC Code |
|---|---|
| White | 28756957362 |