Project Type: All
Painter’s Pro Siliconized Acrylic Caulk
- Paintable
- Mold-resistant caulk†
- Durable and flexible
- 50-year limited durability guarantee†
- Easy to apply
- Exceeds ASTM C-834, Type-OP, NS, Grade -18°C requirement
- Low odor
- Easy water cleanup
†See Product Disclaimers page for important details
GE Painter’s Pro Siliconized Acrylic is an advanced grade caulk ideal for decorative paint projects. GE Painter’s Pro Siliconized Acrylic is paint-friendly. It guns out effortlessly, tools smoothly and cleans-up easily with soap and water. This formulation resists cracking and offers dependable adhesion and flexibility for interior and exterior projects. Fully cured caulk is resistant to stain-causing mold and mildew growth†. GE Painter’s Pro Siliconized Acrylic creates durable seals that are resilient and tough for long-lasting professional results.
Adheres to: Common building materials including most metals and woods, aluminum, brick, stone, stucco, masonry, cement board, glass, drywall, plaster, vinyl siding, PVC, fiberglass, and painted surfaces.
For additional information, see product label.
- Remove dirt, grease, moisture, soap residue & old caulk from area to be sealed. Use backer rod for gaps larger than 3/8″ (W) x 1/4″ (D). A width to depth ratio of 2:1 should be maintained.
- Cut nozzle to obtain desired bead size.
- PIERCE INNER FOIL SEAL.
- Using caulk gun, apply caulk into gap. Apply above 40°F (5°C).
- Smooth or “tool” the caulk into gap within 15 minutes.
- Clean up excess wet caulk with a damp sponge before it skins over. Excess dried caulk must be cut or scraped away. Clean hands and tools with warm water and soap.
- Allow to dry 60 minutes before painting with latex paint or 24 hours if using oil-based paints. Allow a minimum of 24 hours before exposing to water.
Exceeds ASTM C-834, Type-OP, NS, Grade -18°C requirement
Painter_s Pro Seal _ Paint Siliconized Acrylic Label
| Color | UPC Code |
|---|---|
| White | 28756954576 |
| Clear | 28756954538 |
 |  |  | |
|---|---|---|---|
| Paintable | |||
| Paint-Ready Time | 1-hour | 30-minute | 30-minute |
| Durability Guarantee | 50-year | 40-year | 50-year |
Swipe to scroll the table horizontally
Reviews
Painter’s Caulk
- Flexible
- 40-year limited durability guarantee†
- Paintable
- Water resistant
- Easy application & tooling
- Mold resistant†
- Low odor
†See Product Disclaimers page for important details
Painter’s caulk is an all-purpose siliconized acrylic latex ideal for both indoor and outdoor paint projects.
Adheres to: common building materials including most woods, composites, brick, stone, stucco, masonry, cement board, drywall, plaster, vinyl siding, PVC, fiberglass, and painted surfaces.
For complete product details, see packaging label in the “Downloads” tab.
†See Product Disclaimers page for important details.
- Remove dirt, grease, moisture, soap residue & old sealant from area to be sealed. Use backer rod for gaps larger than 1/2″ x 1/2″.
- Cut nozzle to obtain desired bead size.
- Using caulk gun, apply caulk into gap. Apply above 40°F (5°C).
- Smooth with a gloved finger or “tool” the caulk into gap within 3-5 minutes.
- Clean-up with a damp, disposable cloth; do not rinse.
- Protect from moisture for at least 24 hours for proper drying.
| Color | UPC Code |
|---|---|
| White | 028756957881 |
| | | |
|---|---|---|---|
| Paint-Ready Time | 30-minute | 1-hour | 30-minute |
| Durability Guarantee | 40-year | 50-year | 50-year |
| Water-resistant / Waterproof | Water-Resistant | Waterproof | Waterproof |
| Flexibility | • | •• | •• |
| Durability Guarantee | |||
| Paintable |
Swipe to scroll the table horizontally
Reviews
Gutter Silicone 2® Sealant
- 100% silicone
- 100% waterproof & weatherproof
- 10-year mold-free product protection†
- Permanently flexible
- Resists UV degradation
- 30-minute rain-ready†
- Excellent adhesion for wet or dry applications
- Shrink & crack-proof
- Lifetime guarantee†
- Non-paintable
†See Product Disclaimers page for important details
Gutter Silicone 2 sealant is a high-performance, 100% silicone and 100% waterproof sealant ideal for use on metal and vinyl gutters and other exterior applications. This 30-minute rain-ready formula is clear in color and offers permanent flexibility and excellent durability with 10-year mold-free product protection to resist mold and mildew growth. Backed by a lifetime guarantee.
Adheres to: PVC, most metals & woods, aluminum, copper, vinyl siding, asphalt, concrete, cement, composites, brick, stone, stucco, masonry, cement board, glass, ceramic & porcelain tile, drywall, plaster, fiberglass & painted surfaces
For additional information, see product label.
- 1. Remove dirt, grease, moisture, soap residue & old sealant from area to be sealed. Use backer rod for gaps larger than 1/2″ x 1/2″.
- Cut nozzle to obtain desired bead size.
- PIERCE INNER FOIL SEAL.
- Using caulk gun, apply sealant into gap. Smooth with a gloved finger or “tool” the caulk into gap.
- Wipe hands & tools thoroughly before washing.
- Allow 30 minutes before exposing sealant to water.
Meets Fed Spec ASTM C-920, Type-S, NS, Class 25, Use NT, M, G, A & O test requirements
Fed Spec TT-S-00230C; TT-S-001543A
| Color | UPC Code |
|---|---|
| Clear | 28756956686 |
 |  |  |  | |
|---|---|---|---|---|
| Water-ready Time | 30-minute | 30-minute | 30-minute | 30-minute |
| Mold-Free Product Protections | 10-year | 10-year | 10-year | 10-year |
| Joint Movement | 25% | 25% | 25% | 35% |
| Low Odor | ||||
| Will Not Blemish Most High-End Metals | ||||
| Available in Squeeze Tube |
Swipe to scroll the table horizontally
Reviews
Concrete Silicone 2® Sealant
- 100% silicone
- 100% waterproof & weatherproof
- 10-year mold-free product protection†
- Permanently flexible
- Resists UV degradation
- 30-minute rain-ready†
- Shrink & crack-proof
- Excellent for application on concrete, mortar & stone
- Adheres to porous materials & wet or dry surfaces
- Lifetime guarantee†
- Non-paintable
†See Product Disclaimers page for important details
Concrete Silicone 2 sealant is a high-performance, 100% silicone and 100% waterproof sealant ideal for concrete, mortar and stone projects. This 30-minute rain-ready formula is light gray in color and offers permanent flexibility and excellent durability with 10-year mold-free product protection to help resist mold and mildew growth. Backed by a lifetime guarantee.
Adheres to: brick, stone, stucco, masonry, asphalt, concrete, cement, most metals & woods, aluminum, composites, cement board, glass, ceramic & porcelain tile, drywall, plaster, vinyl siding, PVC, fiberglass & painted surfaces
For additional information, see product label.
- Remove dirt, grease, moisture, soap residue & old sealant from area to be sealed. Use backer rod for gaps larger than 1/2″ x 1/2″.
- Cut nozzle to obtain desired bead size.
- PIERCE INNER FOIL SEAL.
- Using caulk gun, apply sealant into gap. Smooth with a gloved finger or “tool” the caulk into gap.
- Wipe hands & tools thoroughly before washing.
- Allow 30 minutes before exposing sealant to water.
Meets Fed Spec ASTM C-920, Type-S, NS, Class 25, Use NT, M, G, A & O test requirements
Fed Spec TT-S-00230C; TT-S-001543A
| Color | UPC Code |
|---|---|
| Light Gray | 28756956693 |
| | | |
|---|---|---|---|
| Water-ready Time | 30-minute | 30-minute | 30-minute |
| Mold-Free Product Protections | 10-year | 10-year | 10-year |
| Joint Movement | 25% | 25% | 25% |
| Low Odor | |||
| Will Not Blemish Most High-End Metals | |||
| Available in Squeeze Tube |
Swipe to scroll the table horizontally
Reviews
Metal Silicone 2® Sealant
- 100% silicone
- 100% waterproof & weatherproof
- 10-year mold-free product protection†
- Permanently flexible
- Shrink & crack-proof
- Resists UV degradation
- 30-minute rain-ready†
- Will not discolor most high-end metal finishes like chrome, bronze & nickel
- Adheres to porous materials & wet or dry surfaces
- Lifetime guarantee†
- Non-paintable
†See Product Disclaimers page for important details
Metal Silicone 2 sealant is a high-performance, 100% silicone and 100% waterproof sealant ideal for repairing and sealing sheds, siding, gutters, recreational vehicles, roofs and vents. This 30-minute rain-ready formula is metallic gray in color and offers excellent adhesion and permanent flexibility with 10-year mold-free product protection to help resist mold and mildew growth. Backed by a lifetime guarantee.
Adheres to: most metals, stainless steel, aluminum, copper, composites, brick, stone, stucco, concrete, cement, masonry, cement board, most woods, glass, ceramic & porcelain tile, drywall, plaster, vinyl siding, PVC, fiberglass & painted surfaces
For additional information, see product label.
- Remove dirt, grease, moisture, soap residue & old sealant from area to be sealed. Use backer rod for gaps larger than 1/2″ x 1/2″.
- Cut nozzle to obtain desired bead size.
- PIERCE INNER FOIL SEAL.
- Using caulk gun, apply sealant into gap. Smooth with a gloved finger or “tool” the caulk into gap.
- Wipe hands & tools thoroughly before washing.
- Allow 30 minutes before exposing sealant to water.
Meets Fed Spec ASTM C-920, Type-S, NS, Class 25, Use NT, M, G, A & O test requirements Fed Spec TT-S-00230C; TT-S-001543A
| Color | UPC Code |
|---|---|
| Metallic Gray | 28756956679 |
| | | | |
|---|---|---|---|---|
| Water-ready Time | 30-minute | 30-minute | 30-minute | 30-minute |
| Mold-Free Product Protections | 10-year | 10-year | 10-year | 10-year |
| Joint Movement | 25% | 25% | 25% | 35% |
| Low Odor | ||||
| Will Not Blemish Most High-End Metals | ||||
| Available in Squeeze Tube |
Swipe to scroll the table horizontally
Reviews
Window & Door Foam
- Seals gaps & cracks around windows & doors without causing frames to bow
- Creates airtight & water-resistant seals
- Helps save energy by reducing drafts
- High R-5 insulating value
- Weatherproof
- Lifetime guarantee†
†See Product Disclaimers page for important details
Seal gaps and cracks around window and door frames with GE-branded Window & Door insulating foam, a low-pressure and low-expansion foam that remains waterproof with an airtight seal.
- Wear safety goggles, gloves, respiratory protection, and protective clothing. Protect surrounding areas with drop cloths.
- Shake can vigorously for one minute.
- Screw straw dispenser trigger completely onto can valve. Use caution to avoid activating the valve.
- To become familiar with product, test on experimental surface. Invert can and slowly depress the trigger to dispense the foam. Continue use in an inverted orientation.
- Fill rough openings approximately 1/3 full to allow for expansion. Release trigger 5 seconds before the end point, but keep straw end moving.
- For deep section application, allow the first layer of foam to cure before applying a second layer. Do not disturb uncured foam. See typical product information on label for times.
- Trim cured foam with a sharp knife or sand as needed. Foam exposed to sunlight must be painted or stained.
| Color | UPC Code |
|---|---|
| White | 028756957386 |
Related Products
Reviews
Gaps & Cracks
- Seals small gaps & cracks up to 1 inch
- Repels water & helps prevent mold & rot
- Blocks rodents & insects
- High R-5 insulating value
- Lifetime guarantee†
†See Product Disclaimers page for important details
Seal small gaps and cracks up to 1 inch with GE-branded Gaps and Cracks insulating foam, offering a water-resistant and airtight seal to keep out water and reduce drafts.
- Wear safety goggles, gloves, respiratory protection, and protective clothing. Protect surrounding areas with drop cloths.
- Shake can vigorously for one minute.
- Screw straw dispenser trigger completely onto can valve. Use caution to avoid activating the valve.
- To become familiar with product, test on experimental surface. Invert can and slowly depress the trigger to dispense the foam. Continue use in an inverted orientation.
- Fill rough openings approximately 1/3 full to allow for expansion. Release trigger 5 seconds before the end point, but keep straw end moving.
- For deep section application, allow the first layer of foam to cure before applying a second layer. Do not disturb uncured foam. See typical product information on label for times.
- Trim cured foam with a sharp knife or sand as needed. Foam exposed to sunlight must be painted or stained.
| Color | UPC Code |
|---|---|
| White | 028756957379 |
Related Products
Reviews
Big Gaps & Cracks
- Expands & seals gaps greater than 1 inch
- Creates an airtight & water-resistant seal
- Helps save energy by reducing drafts
- High R-5 insulating value
- Lifetime guarantee†
†See Product Disclaimers page for important details
Fill gaps and cracks larger than 1 inch with GE-branded Large Gaps insulating foam, offering a water-resistant and airtight seal to keep out water and reduce drafts.
- Wear safety goggles, gloves, respiratory protection, and protective clothing. Protect surrounding areas with drop cloths.
- Shake can vigorously for one minute.
- Screw straw dispenser trigger completely onto can valve. Use caution to avoid activating the valve.
- To become familiar with product, test on experimental surface. Invert can and slowly depress the trigger to dispense the foam. Continue use in an inverted orientation.
- Fill rough openings approximately 1/3 full to allow for expansion. Release trigger 5 seconds before the end point, but keep straw end moving.
- For deep section application, allow the first layer of foam to cure before applying a second layer. Do not disturb uncured foam. See typical product information on label for times.
- Trim cured foam with a sharp knife or sand as needed. Foam exposed to sunlight must be painted or stained.
| Color | UPC Code |
|---|---|
| White | 28756957362 |
Related Products
Reviews
Silicone 2® Glue
- General-purpose adhesive
- Permanently waterproof & flexible
- Strong adhesion
- Shrink and crack-proof
- Easy to apply
- Clear and low odor
- Tack-free in 30 minutes: fully dries in 24 to 48 hours
- 30-minute water-ready†
- Limited lifetime guarantee†
†See Product Disclaimers page for important details
GE Silicone 2® Glue is a premium 100% Silicone adhesive from America’s #1 Silicone Brand†. Ideal for both household and craft applications, this glue adheres well to glass, metal, plastic, rubber, ceramic, fiberglass, painted surfaces and wood. Use it indoors or outdoors to create 100% waterproof and permanently flexible bonds that can resist impacts and extreme temperatures while remaining shrink-proof and crack-proof. GE Silicone 2® Glue is low odor and dries clear, making it an excellent choice for a wide range of projects, including sealing, gluing and repairing sinks, tubs, plumbing fixtures, ceramic tile, windows, vents, trim, toys, jewelry, art pieces, appliances and much more.
†Estimates of comparative U.S. sales based on analysis of available 2018 industry reports and retail sales data.
Adheres to: most metals, plastics & woods, glass, drywall, plaster, granite, marble, ceramic & formica, fiberglass, aluminum, rubber & painted surfaces.
For additional information, see product label.
- Remove dirt, grease, moisture, and old glue from surfaces to be bonded.
- Remove cap & cut nozzle to obtain desired bead size.
- Apply glue to one surface in a zigzag or “X” pattern.
- Join parts together and wipe away excess glue with mineral spirits.
- Tape, brace or clamp as needed until glue dries, typically 24 hours.
| Color | UPC Code |
|---|---|
| White | 28756956846 |