Color: White
Pest Block Insulating Foam
- Blocks out pests & bugs
- Seals gaps & cracks up to 1 inch
- Creates an airtight & weatherproof† barrier
- Interior or exterior use
- Sandable and paintable
†See Product Disclaimers page for important details
Pest Block Insulating Foam is the ultimate solution to protect homes from unwelcome pests and bugs. With the attached straw applicator, it easily fills gaps and cracks up to 1 inch to create an airtight barrier for year-round protection. Ideal for sealing common pest and bug entry points, it’s recommended for use around wiring, plumbing penetrations, HVAC ductwork, basements, crawlspaces, sill plates, and attic hatches. Once applied, this foam sealant can be trimmed, sanded, stained, or painted for a seamless finish.
For additional information, see product label.
- Shake the can vigorously for 30 seconds prior to using.
- Holding can upside down, press the trigger which controls the outflow rate of the foam.
- Dispense the foam sparingly, filling the joint initially by half to avoid excessive overflows (as the foam will expand). Note: Shake can regularly during use. Slight misting with water can speed the cure.
- Release trigger 5 seconds before the end point but keep the straw end moving. For deeper application, allow the first layer of foam to cure before applying a second layer.
- Foam can be trimmed with a knife after an hour and will be fully cured in approximately 24 hours. Note: It is recommended that foam be protected from UV radiation by a protective covering or coating such as paint plaster, mortar, etc. to avoid discoloration.
For products produced by Henkel Corporation, please use the UPC Code. You can click on the corresponding UPC code below to access the SDS..
Color | UPC Code |
---|---|
White | 3025951 |
Reviews
Grout Whitener Pen
- Refreshes your old grout lines
- Easy to use
- Mess-free
- Dries in just 1 hour
- Mold-resistant†
- Low Odor
†See Product Disclaimers page for important details
The Grout Whitener Pen offers a simple solution for achieving professional results. Designed for DIY use, this grout pen makes refreshing old grout simple and mess-free. Ideal for quick transformations, its fast-drying formula works to whiten grout in just one hour for a bright, like-new look with minimal effort.
For additional information, see product label.
- Ensure the grout line is clean, dry, and free from contaminants that could impair adhesion. Where necessary, treat the existing grout with a mold remover to eradicate mold contamination.
- Shake well. Remove the cap and depress the nib several times until the whitener begins to flow. Apply sparingly on the grout in an even coat. Re-apply after an hour if needed.
- Apply grout whitener vertically from the bottom of the tile joint to the top when appropriate.
- Remove excess grout whitener before it dries with a damp cloth.
- Clean applicator after use with water and replace the cap.
Reviews
Interior Seal Silicone Sealant
- Easy to use
- For all your interior projects
- 100% waterproof
- 30-minute water-ready†
- Shrink & crack-proof
- Lifetime mold-free product protection†
- Use with GE’s trusted DIY tools for the perfect outcome
- Lifetime guarantee†
†See Product Disclaimers page for important details
Interior Seal Silicone Sealant is a premium grade silicone sealant that simplifies all types of interior projects. Designed with DIYers in mind, it offers strong adhesion and is ideal for sinks, showers, baths, countertops, tile, backsplashes, and plumbing applications. With lifetime mold-free protection, it resists mold and mildew to maintain a clean, polished look. This formula allows for water exposure in as little as 30 minutes, which makes it a reliable choice for fast and easy project completion. Backed by a lifetime guarantee.
Adheres to: Common kitchen and bath materials including most metals, plastics and woods, glass, drywall, plaster, granite, cultured marble, ceramic and porcelain tile, some natural stones, cement board, laminate, fiberglass, aluminum, and many coated/painted surfaces, as well as metal finishes such as chrome, bronze & nickel.
For additional information, see product label.
Instructions
- Remove dirt, grease, moisture, soap residue, and old caulk from the area to be sealed.
- Use a backer rod for gaps larger than 3/8″ (W) x 3/8″ (D) (9.5mm x 9.5mm).
- Remove cap and cut nozzle with the GE Cartridge Opener and Smoothing tool to obtain desired bead size.
- Apply caulk then smooth into gap. Sealant beads should not be thicker than 1/2″ (12.7mm) or thinner than 1/8″ (3.2mm) using a width-to-depth ratio of 2:1.
- Sealant should be tooled within 5-10 minutes after application. Do not use soapy water or oil as a tooling aid.
- Wipe hands and tools thoroughly before washing. Clean tools and uncured sealant residue immediately with mineral spirits or paint thinner.
Meets ASTM C-920, Type S, Grade NS, Class 50, Use G & O test requirements
Federal Spec. TT-S-00230C; TT-S-001543A
Reviews
Exterior Seal Acrylic Caulk
- Easy to use
- For all your exterior projects
- Paintable
- Weather-resistant
- 30-minute paint-ready†
- Formulated for window, door, and siding projects
- Use with GE’s trusted DIY tools for the perfect outcome
†See Product Disclaimers page for important details
Exterior Seal Acrylic Caulk is an advanced grade paintable acrylic caulk that delivers superior performance in outdoor applications. Featuring strong adhesion and excellent flexibility, it can withstand harsh weather conditions while maintaining a durable seal. Its weather-resistant formula makes it ideal for exterior paint projects, with the added convenience of being paint-ready in just 30 minutes. Designed with DIYers in mind, it dispenses effortlessly, tools easily, and cleans up with just soap and water. Backed by a lifetime guarantee.
Adheres to: Common building materials including most metals and woods, aluminum, brick, stone, stucco, masonry, cement board, glass, porcelain, ceramic tile, drywall, plaster, vinyl siding, PVC, fiberglass, and many coated surfaces.
For additional information, see product label.
Instructions
- Use a backer rod for gaps larger than 3/8″ (W) x 1/4″ (D) (9.5mm x 6mm). A width-to-depth ratio of 2:1 should be maintained.
- Cut nozzle to obtain desired bead size with the GE Cartridge Opener and Smoothing tool.
- Apply caulk into gap. Apply above 40°F (5°C).
- Smooth or “tool” the caulk into the gap within 5-10 minutes.
- Clean up excess wet caulk with a damp sponge before it skins over. Excess dried caulk must be cut or scraped away. Clean hands and tools with warm water and soap.
- Allow to dry for 30 minutes before painting with latex paint or 24 hours if using oil-based paints. Allow a minimum of 24 hours before exposing water.
Meets ASTM C-920, Type S, Grade NS, Class 25
Federal Spec. TT-S-00230C; TT-S-001543A
Reviews
Interior Fill Acrylic Putty
- Easy to use
- Paintable
- Formulated for use on walls, trim, and baseboards
- 15-minute speed dry
- Ideal for filling small holes and cracks
- Use with GE’s trusted DIY tools for the perfect outcome
†See Product Disclaimers page for important details
Interior Fill Wall Repair is a high-performance acrylic putty designed for quick and reliable DIY repairs. Perfect for filling small holes and cracks, it works seamlessly on walls, trim, and baseboards for lasting results across a variety of surfaces. Its fast-drying formula is ready for paint in just 15 minutes, making it an excellent choice for touch-ups and minor fixes. Backed by a lifetime guarantee.
Adheres to: Wood, plaster, drywall, wallboard, masonry, brick and concrete.
For additional information, see product label.
Instructions
- Knead tube well before using.
- Remove cap and trim tip to desired bead size with the GE Cartridge Opener and Smoothing tool.
- Squeeze into the opening and remove excess with a putty knife and/or damp cloth immediately after application.
- For deeper holes or cracks, apply 1/8″ (3mm) layers, allowing each to dry thoroughly before applying the next.
- Allow to dry (approximately 15 minutes for a 1/16″ – 1/8″ (2-3mm) depth/width fill before sanding with 120 grit sandpaper.
- Remove sanding dust and prime before painting.
- Soap & water clean-up.
For products produced by Henkel Corporation, please use the UPC Code. You can click on the corresponding UPC code below to access the SDS..
Color | UPC Code |
---|---|
White | 3019891 |
Reviews
Pro Seal Max Kitchen & Bath
- Easy & mess-free application
- Paintable
- As strong as silicone
- 100% waterproof
- Permanently flexible
- Adheres to damp or dry surfaces†
- 60-minute paint-ready†
- Immediate water-ready†
- Shrink & crack-proof
- Resists mold and mildew growth†
- Excellent for interior projects where moisture may be present
- Low odor
- Lifetime guarantee†
†See Product Disclaimers page for important details
Pro Seal Max Kitchen & Bath sealant is a premium, 100% waterproof sealant that combines the superior strength and performance of silicone sealant with the ease of use and paintability of an acrylic latex. An ideal choice for showers, tubs, countertops, backsplashes, fixtures, plumbing, sinks, and tile, this hybrid formula provides a reliable seal in moisture-prone areas that require painting. It offers permanent flexibility with long-lasting durability that resists mold and mildew growth. Backed by a lifetime guarantee.
Adheres to: Stone/marble, metal, wood, glass, porcelain, ceramic tile, drywall, plaster, PVC, fiberglass, aluminum, brick, masonry, cement board, and most architectural coatings/finishes.
For additional information, see product label.
- Remove dirt, grease, moisture, soap residue & old sealant from area to be sealed. Use backer rod for gaps larger than 1/2″ x 1/2″.
- Cut nozzle to obtain desired bead size.
- PIERCE INNER FOIL SEAL.
- Using caulk gun, apply sealant into gap. Smooth with a gloved finger or “tool” the caulk into gap.
- Wipe hands & tools thoroughly before washing.
Meets ASTM C-920 Class 35 specifications – white color
Meets ASTM C-920 Class 25 specifications – clear color
![]() | ![]() | ![]() | |
---|---|---|---|
Paintable | |||
Water-ready Time | Immediate Water-Ready | 30-minute | 30-minute |
Low Odor |
Swipe to scroll the table horizontally
Reviews
Pro Seal Max Window & Door
- Easy & mess-free application
- Paintable
- As strong as silicone
- 100% weatherproof
- Permanently flexible
- Adheres to damp or dry surfaces†
- 60-minute paint-ready†
- Immediate water-ready†
- UV-resistant
- Shrink & crack-proof
- Ideal for interior & exterior projects
- Low odor
- Lifetime guarantee†
†See Product Disclaimers page for important details
Pro Seal Max Window & Door sealant is a premium, 100% waterproof sealant with a hybrid formula that combines the outstanding weatherproof performance you would expect from a silicone sealant with the ease of use and paintability of an acrylic latex. Ideal for windows, doors, siding, trim, soffits, and vents, this formula provides a reliable seal in areas that are exposed to weather and require painting. It offers permanent flexibility with long-lasting durability and UV resistance to prevent hardening and yellowing. Backed by a lifetime guarantee.
Adheres to: Stone/marble, metal, wood, glass, porcelain, ceramic tile, drywall, plaster, PVC, fiberglass, aluminum, brick, masonry, cement board, and most architectural coatings/finishes.
For additional information, see product label.
- Remove dirt, grease, moisture, soap residue & old sealant from area to be sealed. Use backer rod for gaps larger than 1/2″ x 1/2″.
- Cut nozzle to obtain desired bead size.
- PIERCE INNER FOIL SEAL.
- Using caulk gun, apply sealant into gap. Smooth with a gloved finger or “tool” the caulk into gap.
- Wipe hands & tools thoroughly before washing.
Meets ASTM C-920 Class 35 specifications – white color
Meets ASTM C-920 Class 25 specifications – clear color
![]() | ![]() | ![]() | |
---|---|---|---|
Paintable | |||
Water-ready Time | Immediate Water-Ready | 30-minute | 30-minute |
Low Odor |
Swipe to scroll the table horizontally
Reviews
Supreme Silicone Window & Door Sealant
- 100% silicone
- 100% weatherproof
- Lifetime mold-free product protection†
- Meets ASTM C-920, Class 50
- 100% more flexibility than Class 25 sealants†
- 7X stronger adhesion†
- 30-minute rain-ready†
- Shrink & crack-proof
- Resists UV degradation
- Won’t blemish most high-end metal finishes like chrome, bronze & nickel
- Lifetime guarantee†
- Neutral curing with low odor
- Non-paintable
†See Product Disclaimers page for important details
Supreme Silicone Window & Door sealant is a premium, 100% silicone and 100% waterproof sealant that provides a reliable seal in weather-prone areas like windows, doors, basements, roofs, sidewalks, siding, tuckpointing and attics. This sealant offers 100% more flexibility than Class 25 sealants and 7X stronger adhesion than Silicone 1® sealant. And, it offers 50% joint movement capability without cracking, shrinking, breaking down or washing away. This sealant has lifetime mold-free product protection that resists stain-causing mold and mildew growth. Backed by a lifetime guarantee.
Adheres to: most metals & woods, aluminum, composites, brick, stone, stucco, masonry, cement board, glass, ceramic & porcelain tile, drywall, plaster, vinyl siding, PVC, fiberglass & painted surfaces
For additional information, see product label.
- Remove dirt, grease, moisture, soap residue & old sealant from area to be sealed. Use backer rod for gaps larger than 1/2″ x 1/2″.
- Cut nozzle to obtain desired bead size.
- PIERCE INNER FOIL SEAL.
- Using caulk gun, apply sealant into gap. Smooth with a gloved finger or “tool” the caulk into gap.
- Wipe hands & tools thoroughly before washing.
- Allow 30 minutes before exposing sealant to water.
Meets ASTM C-920, Type-S, NS, Class 50, Use A, G & O test requirements
Fed Spec TT-S-00230C; TT-S-001543A
For products produced by Henkel Corporation, please use the UPC Code. You can click on the corresponding UPC code below to access the SDS..
Color | UPC Code |
---|---|
White | 28756956556 |
Clear | 28756956563 |
Almond | 28756957065 OR 28756956082 |
Black | 28756957034 OR 28756956099 |
Light Gray | 28756956990 OR 28756956112 |
Brown | 28756957010 OR 28756956105 |
![]() | ![]() | ![]() | ![]() | |
---|---|---|---|---|
Water-ready Time | 30-minute | 24 Hours | 30-minute | 30-minute |
Joint Movement | 50% | 25% | 35% | 50% |
Available in Squeeze Tube | ||||
Will Not Blemish Most High-End Metals | ||||
Low Odor | ||||
Mold-Free Product Protections | Lifetime | 7-year | 10-year | 10-year |
Swipe to scroll the table horizontally
Reviews
Advanced Silicone 2® Window & Door Sealant
- 100% silicone
- 100% weatherproof
- 10-year mold-free product protection†
- Meets ASTM C-920, Class 35
- 40% more flexibility than Class 25 sealants†
- 30-minute rain-ready†
- Shrink & crack-proof
- Resists UV degradation
- Lifetime guarantee†
- Neutral curing with low odor
- Non-paintable
†See Product Disclaimers page for important details
Advanced Silicone 2 Window & Door sealant is a high-performance, 100% silicone and 100% weatherproof sealant formulated to protect areas susceptible to harsh weather. These areas include windows, doors, siding, trim, molding, baseboards, vents, basements, attics and around wires and pipes. Its 30-minute rain-ready formula offers 40% more flexibility than Class 25 sealants and is 5X stronger than Silicone 1® sealant. In addition, it has 10-year mold-free product protection to help resist mold and mildew growth. Backed by a lifetime guarantee.
Adheres to: most metals & woods, aluminum, composites, brick, stone, stucco, masonry, cement board, glass, ceramic & porcelain tile, drywall, plaster, vinyl siding, PVC, fiberglass & painted surfaces
For additional information, see product label.
- Remove dirt, grease, moisture, soap residue & old sealant from area to be sealed. Use backer rod for gaps larger than 1/2″ x 1/2″.
- Cut nozzle to obtain desired bead size.
- PIERCE INNER FOIL SEAL.
- Using caulk gun, apply sealant into gap. Smooth with a gloved finger or “tool” the caulk into gap.
- Wipe hands & tools thoroughly before washing.
- Allow 30 minutes before exposing sealant to water.
Meets ASTM C-920, Type-S, NS, Class 35 Use G test requirements
Meets ASTM C-920, Type-S, Class 25, Use NT, M, A & O test requirements
Fed Spec TT-S-00230C; TT-S-001543A
For products produced by Henkel Corporation, please use the UPC Code. You can click on the corresponding UPC code below to access the SDS..
Color | UPC Code |
---|---|
White | 28756956761 |
Clear | 28756956778 |
Almond | 28756956730 |
Black | 28756956754 |
Light Gray | 28756956747 |
Brown | 28756956723 |
![]() | ![]() | ![]() | ![]() | |
---|---|---|---|---|
Water-ready Time | 30-minute | 30-minute | 24 Hours | 30-minute |
Mold-Free Product Protections | 10-year | Lifetime | 7-year | 10-year |
Joint Movement | 35% | 50% | 25% | 50% |
Low Odor | ||||
Will Not Blemish Most High-End Metals | ||||
Available in Squeeze Tube |
Swipe to scroll the table horizontally
Reviews
All Purpose Silicone 1® Sealant
- 100% silicone
- 100% weatherproof
- 7-year mold-free product protection†
- Meets ASTM C-920, Class 25
- Permanently flexible
- Strong adhesion & durability
- Same-day rain-ready†
- Shrink & crack-proof
- Resists UV degradation
- Lifetime guarantee†
- Non-paintable
†See Product Disclaimers page for important details
All Purpose Silicone 1 sealant is a 100% silicone and 100% weatherproof sealant ideal for areas that could be exposed to weather. These areas include windows, doors, siding, trim, molding, baseboards, vents, basements, attics and around wires and pipes. Its same-day rain-ready formula is extremely flexible with strong adhesion and resistant to stain-causing mold and mildew growth with 7-year mold-free product protection. Backed by a lifetime guarantee.
Adheres to: most metals, plastics & woods, glass, drywall, plaster, granite, cultured marble, ceramic & porcelain tile, natural stone, cement board, composites, Formica, fiberglass, aluminum & painted surfaces
For additional information, see product label.
- Remove dirt, grease, moisture, soap residue & old sealant from area to be sealed. Use backer rod for gaps larger than 1/2″ x 1/2″.
- Cut nozzle to obtain desired bead size.
- PIERCE INNER FOIL SEAL.
- Using caulk gun, apply sealant into gap. Smooth with a gloved finger or “tool” the caulk into gap.
- Wipe hands & tools thoroughly before washing.
- Allow 12 hours before exposing sealant to water.
Meets ASTM C-920, Type-S, NS, Class 25, use NT, M, G, A & O test requirements
Fed Spec TT-S-00230C; TT-S-001543A
All Purpose Silicone 1 sealant is compliant for incidental food contact under FDA 21 CFR177.2600 “Rubber articles intended for repeated use.”
For products produced by Henkel Corporation, please use the UPC Code. You can click on the corresponding UPC code below to access the SDS..
Color | UPC Code |
---|---|
White | 028756957348 |
Clear | 28756956877 |
![]() | ![]() | ![]() | |
---|---|---|---|
Water-ready Time | 24 Hours | 30-minute | 30-minute |
Mold-Free Product Protections | 7-year | Lifetime | 10-year |
Joint Movement | 25% | 50% | 50% |
Low Odor | |||
Will Not Blemish Most High-End Metals | |||
Available in Squeeze Tube |
Swipe to scroll the table horizontally