Performance: Paintable
Pest Block Insulating Foam
- Blocks out pests & bugs
- Seals gaps & cracks up to 1 inch
- Creates an airtight & weatherproof† barrier
- Interior or exterior use
- Sandable and paintable
†See Product Disclaimers page for important details
Pest Block Insulating Foam is the ultimate solution to protect homes from unwelcome pests and bugs. With the attached straw applicator, it easily fills gaps and cracks up to 1 inch to create an airtight barrier for year-round protection. Ideal for sealing common pest and bug entry points, it’s recommended for use around wiring, plumbing penetrations, HVAC ductwork, basements, crawlspaces, sill plates, and attic hatches. Once applied, this foam sealant can be trimmed, sanded, stained, or painted for a seamless finish.
For additional information, see product label.
- Shake the can vigorously for 30 seconds prior to using.
- Holding can upside down, press the trigger which controls the outflow rate of the foam.
- Dispense the foam sparingly, filling the joint initially by half to avoid excessive overflows (as the foam will expand). Note: Shake can regularly during use. Slight misting with water can speed the cure.
- Release trigger 5 seconds before the end point but keep the straw end moving. For deeper application, allow the first layer of foam to cure before applying a second layer.
- Foam can be trimmed with a knife after an hour and will be fully cured in approximately 24 hours. Note: It is recommended that foam be protected from UV radiation by a protective covering or coating such as paint plaster, mortar, etc. to avoid discoloration.
For products produced by Henkel Corporation, please use the UPC Code. You can click on the corresponding UPC code below to access the SDS..
| Color | UPC Code |
|---|---|
| White | 3025951 |
Related Products
Reviews
Exterior Seal Acrylic Caulk
- Easy to use
- For all your exterior projects
- Paintable
- Weather-resistant
- 30-minute paint-ready†
- Formulated for window, door, and siding projects
- Use with GE’s trusted DIY tools for the perfect outcome
†See Product Disclaimers page for important details
Exterior Seal Acrylic Caulk is an advanced grade paintable acrylic caulk that delivers superior performance in outdoor applications. Featuring strong adhesion and excellent flexibility, it can withstand harsh weather conditions while maintaining a durable seal. Its weather-resistant formula makes it ideal for exterior paint projects, with the added convenience of being paint-ready in just 30 minutes. Designed with DIYers in mind, it dispenses effortlessly, tools easily, and cleans up with just soap and water. Backed by a lifetime guarantee.
Adheres to: Common building materials including most metals and woods, aluminum, brick, stone, stucco, masonry, cement board, glass, porcelain, ceramic tile, drywall, plaster, vinyl siding, PVC, fiberglass, and many coated surfaces.
For additional information, see product label.
Instructions
- Use a backer rod for gaps larger than 3/8″ (W) x 1/4″ (D) (9.5mm x 6mm). A width-to-depth ratio of 2:1 should be maintained.
- Cut nozzle to obtain desired bead size with the GE Cartridge Opener and Smoothing tool.
- Apply caulk into gap. Apply above 40°F (5°C).
- Smooth or “tool” the caulk into the gap within 5-10 minutes.
- Clean up excess wet caulk with a damp sponge before it skins over. Excess dried caulk must be cut or scraped away. Clean hands and tools with warm water and soap.
- Allow to dry for 30 minutes before painting with latex paint or 24 hours if using oil-based paints. Allow a minimum of 24 hours before exposing water.
Meets ASTM C-920, Type S, Grade NS, Class 25
Federal Spec. TT-S-00230C; TT-S-001543A
Reviews
Interior Fill Acrylic Putty
- Easy to use
- Paintable
- Formulated for use on walls, trim, and baseboards
- 15-minute speed dry
- Ideal for filling small holes and cracks
- Use with GE’s trusted DIY tools for the perfect outcome
†See Product Disclaimers page for important details
Interior Fill Wall Repair is a high-performance acrylic putty designed for quick and reliable DIY repairs. Perfect for filling small holes and cracks, it works seamlessly on walls, trim, and baseboards for lasting results across a variety of surfaces. Its fast-drying formula is ready for paint in just 15 minutes, making it an excellent choice for touch-ups and minor fixes. Backed by a lifetime guarantee.
Adheres to: Wood, plaster, drywall, wallboard, masonry, brick and concrete.
For additional information, see product label.
Instructions
- Knead tube well before using.
- Remove cap and trim tip to desired bead size with the GE Cartridge Opener and Smoothing tool.
- Squeeze into the opening and remove excess with a putty knife and/or damp cloth immediately after application.
- For deeper holes or cracks, apply 1/8″ (3mm) layers, allowing each to dry thoroughly before applying the next.
- Allow to dry (approximately 15 minutes for a 1/16″ – 1/8″ (2-3mm) depth/width fill before sanding with 120 grit sandpaper.
- Remove sanding dust and prime before painting.
- Soap & water clean-up.
For products produced by Henkel Corporation, please use the UPC Code. You can click on the corresponding UPC code below to access the SDS..
| Color | UPC Code |
|---|---|
| White | 3019891 |
Reviews
Pro Seal Max Kitchen & Bath
- Easy & mess-free application
- Paintable
- As strong as silicone
- 100% waterproof
- Permanently flexible
- Adheres to damp or dry surfaces†
- 60-minute paint-ready†
- Immediate water-ready†
- Shrink & crack-proof
- Resists mold and mildew growth†
- Excellent for interior projects where moisture may be present
- Low odor
- Lifetime guarantee†
†See Product Disclaimers page for important details
Pro Seal Max Kitchen & Bath sealant is a premium, 100% waterproof sealant that combines the superior strength and performance of silicone sealant with the ease of use and paintability of an acrylic latex. An ideal choice for showers, tubs, countertops, backsplashes, fixtures, plumbing, sinks, and tile, this hybrid formula provides a reliable seal in moisture-prone areas that require painting. It offers permanent flexibility with long-lasting durability that resists mold and mildew growth. Backed by a lifetime guarantee.
Adheres to: Stone/marble, metal, wood, glass, porcelain, ceramic tile, drywall, plaster, PVC, fiberglass, aluminum, brick, masonry, cement board, and most architectural coatings/finishes.
For additional information, see product label.
- Remove dirt, grease, moisture, soap residue & old sealant from area to be sealed. Use backer rod for gaps larger than 1/2″ x 1/2″.
- Cut nozzle to obtain desired bead size.
- PIERCE INNER FOIL SEAL.
- Using caulk gun, apply sealant into gap. Smooth with a gloved finger or “tool” the caulk into gap.
- Wipe hands & tools thoroughly before washing.
Meets ASTM C-920 Class 35 specifications – white color
Meets ASTM C-920 Class 25 specifications – clear color
| Pro Seal Max Kitchen & Bath |  Supreme Silicone Kitchen & Bath Sealant |  Advanced Silicone 2® Kitchen & Bath Sealant | |
|---|---|---|---|
| Paintable | |||
| Water-ready Time | Immediate Water-Ready | 30-minute | 30-minute |
| Low Odor |
Swipe to scroll the table horizontally
Reviews
Pro Seal Max Window & Door
- Easy & mess-free application
- Paintable
- As strong as silicone
- 100% weatherproof
- Permanently flexible
- Adheres to damp or dry surfaces†
- 60-minute paint-ready†
- Immediate water-ready†
- UV-resistant
- Shrink & crack-proof
- Ideal for interior & exterior projects
- Low odor
- Lifetime guarantee†
†See Product Disclaimers page for important details
Pro Seal Max Window & Door sealant is a premium, 100% waterproof sealant with a hybrid formula that combines the outstanding weatherproof performance you would expect from a silicone sealant with the ease of use and paintability of an acrylic latex. Ideal for windows, doors, siding, trim, soffits, and vents, this formula provides a reliable seal in areas that are exposed to weather and require painting. It offers permanent flexibility with long-lasting durability and UV resistance to prevent hardening and yellowing. Backed by a lifetime guarantee.
Adheres to: Stone/marble, metal, wood, glass, porcelain, ceramic tile, drywall, plaster, PVC, fiberglass, aluminum, brick, masonry, cement board, and most architectural coatings/finishes.
For additional information, see product label.
- Remove dirt, grease, moisture, soap residue & old sealant from area to be sealed. Use backer rod for gaps larger than 1/2″ x 1/2″.
- Cut nozzle to obtain desired bead size.
- PIERCE INNER FOIL SEAL.
- Using caulk gun, apply sealant into gap. Smooth with a gloved finger or “tool” the caulk into gap.
- Wipe hands & tools thoroughly before washing.
Meets ASTM C-920 Class 35 specifications – white color
Meets ASTM C-920 Class 25 specifications – clear color
| Pro Seal Max Window & Door |  Supreme Silicone Window & Door Sealant |  Advanced Silicone 2® Window & Door Sealant | |
|---|---|---|---|
| Paintable | |||
| Water-ready Time | Immediate Water-Ready | 30-minute | 30-minute |
| Low Odor |
Swipe to scroll the table horizontally
Reviews
Paintable Silicone Supreme Window & Door Sealant
- 100% weatherproof
- 10-year mold-free product protection†
- Permanently flexible
- 60-minute paint-ready†
- 30-minute rain-ready†
- Shrink & crack-proof
- Ideal for exterior, weatherproofing & painting projects
- Low odor
- Lifetime guarantee†
†See Product Disclaimers page for important details
Paintable Silicone Supreme Window & Door sealant is a premium, 100% weatherproof sealant with a hybrid formula that combines the outstanding waterproof performance you would expect from a silicone sealant with the ease of use and paintability of an acrylic latex. Ideal for exterior weatherproofing projects, this formula is designed to provide a reliable seal in areas that may be exposed to moisture and require painting. This sealant is permanently flexible with long-lasting durability and offers 10-year mold-free product protection that resists stain-causing mold and mildew growth. Backed by a lifetime guarantee.
Adheres to: most metals & woods, aluminum, composites, brick, stone, stucco, masonry, cement board, glass, ceramic & porcelain tile, drywall, plaster, vinyl siding, PVC, fiberglass & painted surfaces
For additional information, see product label.
- Remove dirt, grease, moisture, soap residue & old sealant from area to be sealed. Use backer rod for gaps larger than 1/2″ x 1/2″.
- Cut nozzle to obtain desired bead size.
- PIERCE INNER FOIL SEAL.
- Using caulk gun, apply sealant into gap. Smooth with a gloved finger or “tool” the caulk into gap.
- Wipe hands & tools thoroughly before washing.
- Allow 30 minutes before exposing sealant to water.
Meets ASTM C-920, Type-S, NS, Class 25, use NT, G, A & O test requirements
Fed Spec TT-S-00230C, TT-S-001543A
For products produced by Henkel Corporation, please use the UPC Code. You can click on the corresponding UPC code below to access the SDS..
| Color | UPC Code |
|---|---|
| White | 61083642488 |
| Paintable Silicone Supreme Window & Door Sealant |  All Purpose Silicone 1® Sealant | Supreme Silicone Window & Door Sealant | |
|---|---|---|---|
| Water-ready Time | 30-minute | 24 Hours | 30-minute |
| Mold-Free Product Protections | 10-year | 7-year | Lifetime |
| Joint Movement | 50% | 25% | 50% |
| Paintable | |||
| Low Odor | |||
| Will Not Blemish Most High-End Metals |
Swipe to scroll the table horizontally
Reviews
Siliconized Advanced Acrylic Window & Door Sealant
- Paintable
- Waterproof
- 30-minute paint-ready†
- Mold-resistant†
- Excellent flexibility for for durable, crack-resistant seals†
- Easy to apply
- Enhanced durability
- Exceeds ASTM C-920
- Low odor
†See Product Disclaimers page for important details
GE Siliconized Advanced Acrylic is a premium sealant ideal for painting projects susceptible to humidity and moisture. This sealant is waterproof, and offers exceptional flexibility, excellent adhesion to a wide variety of common wiindows and door surfaces, and has lasting mold and mildew resistance. This paintable sealant resists cracking, has no solvent odor, guns out effortlessly, tools smoothly, and cleans up easily with soap and water. Durable and scrubbable, this premium sealant creates seals that retain their original clean look for long lasting, professional results.
Adheres to: most metals, plastics and woods, glass, drywall, plaster, granite, cultured marble, ceramic and porcelain tile, natural stone, cement board, composites, formica, fiberglass, aluminum, and painted surfaces.
For additional information, see product label.
- Remove dirt, grease, moisture, soap residue & old sealant from area to be sealed. Use backer rod for gaps larger than 1/4″ x 3/8″. A width to depth ration of 2:1 should be maintained.
- Cut nozzle to obtain desired bead size.
- Using a caulk gun, apply sealant into gap. Apply above 40oF (5oC).
- Smooth or “tools” the sealant into gap within 15 minutes.
- Clean up excess wet sealant with a damp sponge before it skins over. Excess dried sealant must be cut or scraped away. Clean hands and tolls with warm water and soap.
- Allow to dry 30 minutes before painting with latex paint or 24 hours if using oil-based paints. Allow a minimum of 24 hours before exposing to water.
Exceeds ASTM C-920, Type-S, NS, Class 25, Use NT, A test requirements.
Siliconized Advanced Acrylic Window & Door Clear Back Label
GE Siliconized Advanced Acrylic Window & Door Clear and White Technical Data Sheet
For products produced by Henkel Corporation, please use the UPC Code. You can click on the corresponding UPC code below to access the SDS..
| Color | UPC Code |
|---|---|
| White | 28756955160 |
| Clear | 28756955108 |
| Siliconized Advanced Acrylic Window & Door Sealant |  Siliconized Multi-Purpose Acrylic Window & Door Caulk | Advanced Silicone 2® Window & Door Sealant | Supreme Silicone Window & Door Sealant | |
|---|---|---|---|---|
| Water-ready Time | 24 Hours | 48 hours | 30-minute | 30-minute |
| Mold-Free Product Protections | Mold-resistant1 | Mold-resistant1 | 10-year | Lifetime |
| Joint Movement | 25% | 35% | 50% | |
| Low Odor | ||||
| Will Not Blemish Most High-End Metals | ||||
| Available in Squeeze Tube |
Swipe to scroll the table horizontally
Reviews
Siliconized Multi-Purpose Acrylic Window & Door Caulk
- Paintable
- Water-resistant
- Mold-resistant†
- Durable and flexible
- Easy to apply
- Exceeds ASTM C-834, Type-OP, NS, Grade -18°C requirement
- Low odor
- Easy soap and water cleanup
- 30-minute paint-ready†
†See Product Disclaimers page for important details
GE Siliconized Multi-Purpose Acrylic, Window & Door is an advanced grade caulk. This formulation offers strong adhesion and excellent flexibility to withstand severe weather conditions. Ideal for exterior and interior paint projects, this water resistant caulk is paint-ready in as little as 30 minutes for quicker workflow. Fully cured caulk resists mold and mildew growth. GE Siliconized Multi-Purpose Acrylic guns out effortlessly, tools smoothly, and cleans-up easily with soap and water.
Adheres to: Common building materials including most metals and woods, aluminum, brick, stone, stucco, masonry, cement board, glass, porcelain, ceramic tile, drywall, plaster, vinyl siding, PVC, fiberglass, and painted surfaces.
For additional information, see product label.
- Remove dirt, grease, moisture, soap residue & old caulk from area to be sealed. Use backer rod for gaps larger than 3/8″ (W) x 1/4″ (D). A width to depth ratio of 2:1 should be maintained.
- Cut nozzle to obtain desired bead size.
- PIERCE INNER FOIL SEAL.
- Using caulk gun, apply caulk into gap. Apply above 40°F (5°C).
- Smooth or “tool” the caulk into gap within 15 minutes.
- Clean up excess wet caulk with a damp sponge before it skins over. Excess dried caulk must be cut or scraped away. Clean hands and tools with warm water and soap.
- Allow to dry 30 minutes before painting with latex paint or 24 hours if using oil-based paints. Allow a minimum of 24 hours before exposing to water.
Exceeds ASTM C-834, Type-OP, NS, Grade -18°C requirement
Siliconized-Multi-Purpose-Acrylic-Window-_-Door-Cartridge-14
Siliconized Multi-Purpose Acrylic Window & Door Squeeze Tube 5.5oz Label
For products produced by Henkel Corporation, please use the UPC Code. You can click on the corresponding UPC code below to access the SDS..
| Color | UPC Code |
|---|---|
| White | 28756954415 |
| Clear | 28756954392 |
| Siliconized Multi-Purpose Acrylic Window & Door Caulk | Siliconized Advanced Acrylic Window & Door Sealant | All Purpose Silicone 1® Sealant | |
|---|---|---|---|
| Water-resistant / Waterproof | Water-Resistant | 100% Waterproof | 100% Waterproof |
| Mold-Free Product Protections | Mold-resistant1 | Mold-resistant1 | 7-year |
| Water-ready Time | 48 hours | 24 Hours | 24 Hours |
| Low Odor | |||
| Will Not Blemish Most High-End Metals | |||
| Available in Squeeze Tube |
Swipe to scroll the table horizontally
Reviews
Seal & Fill Multi-Purpose Window & Door Caulk
- Paintable caulk for windows, doors, siding & trim
- Easy to apply
- Simple soap and water cleanup
- Paint-ready in just 30 minutes†
- Strong adhesion & flexibility for harsh weather
- Water-resistant
- Mold-resistant†
- Low odor
- Bonds with wood, drywall, metal & more
†See Product Disclaimers page for important details
Ideal for putting the finishing touch on window, door, siding and trim paint projects, GE Seal & Fill Multi-Purpose Window & Door Caulk is easy to use and ready for painting in just 30 minutes. This low-odor caulk forms a durable, water- and mold-resistant seal to ensure long-lasting results.
Adheres to: Common building materials including most metals and woods, aluminum, brick, stone, stucco, masonry, cement board, glass, porcelain, ceramic tile, drywall, plaster, vinyl siding, PVC, fiberglass, and painted surfaces.
For additional information, see product label.
- Remove dirt, grease, moisture, soap residue & old caulk from area to be sealed. Use backer rod for gaps larger than 3/8″ (W) x 1/4″ (D). A width to depth ratio of 2:1 should be maintained.
- Cut nozzle to obtain desired bead size.
- PIERCE INNER FOIL SEAL.
- Using caulk gun, apply caulk into gap. Apply above 40°F (5°C).
- Smooth or “tool” the caulk into gap within 15 minutes.
- Clean up excess wet caulk with a damp sponge before it skins over. Excess dried caulk must be cut or scraped away. Clean hands and tools with warm water and soap.
- Allow to dry 30 minutes before painting with latex paint or 24 hours if using oil-based paints. Allow a minimum of 24 hours before exposing to water.
Exceeds ASTM C-834, Type-OP, NS, Grade -18°C requirement
For products produced by Henkel Corporation, please use the UPC Code. You can click on the corresponding UPC code below to access the SDS..
| Color | UPC Code |
|---|---|
| White | 28756954415 |
| Clear | 28756954392 |
| Seal & Fill Multi-Purpose Window & Door Caulk | Advanced Silicone 2® Window & Door Sealant | Supreme Silicone Window & Door Sealant | |
|---|---|---|---|
| Water-ready Time | 48 hours | 30-minute | 30-minute |
| Water-resistant / Waterproof | Water-Resistant | 100% Waterproof | 100% Waterproof |
| Mold-Free Product Protections | Mold-resistant1 | 10-year | Lifetime |
| Paintable | |||
| Low Odor | |||
| Will Not Blemish Most High-End Metals | |||
| Available in Squeeze Tube |
Swipe to scroll the table horizontally
Reviews
Paintable Silicone Supreme Kitchen & Bath Sealant
- 100% waterproof
- 10-year mold-free product protection†
- Permanently flexible
- Excellent adhesion
- 60-minute paint-ready†
- 30-minute water-ready†
- Shrink & crack-proof
- Excellent for interior projects where moisture may be present
- Low odor
- Lifetime guarantee†
†See Product Disclaimers page for important details
Paintable Silicone Supreme Kitchen & Bath sealant is a premium, 100% waterproof sealant with a hybrid formula that combines the outstanding waterproof performance you would expect from a silicone sealant with the ease of use and paintability of an acrylic latex. This formula provides a reliable seal in areas that are prone to moisture and require painting. It offers permanent flexibility with long-lasting durability that can withstand scrubbing and has 10-year mold-free product protection that helps resist mold and mildew growth. Backed by a lifetime guarantee.
Adheres to: most metals, plastics & woods, glass, drywall, plaster, granite, cultured marble, ceramic & porcelain tile, natural stone, cement board, composites, Formica, fiberglass, aluminum & painted surfaces
For additional information, see product label.
- Remove dirt, grease, moisture, soap residue & old sealant from area to be sealed. Use backer rod for gaps larger than 1/2″ x 1/2″.
- Cut nozzle to obtain desired bead size.
- PIERCE INNER FOIL SEAL.
- Using caulk gun, apply sealant into gap. Smooth with a gloved finger or “tool” the caulk into gap.
- Wipe hands & tools thoroughly before washing.
- Allow 30 minutes before exposing sealant to water.
Meets ASTM C-920, Type-S, NS, Class 50, Use A, G & O test requirements
Fed Spec TT-S-00230C; TT-S-001543A
For products produced by Henkel Corporation, please use the UPC Code. You can click on the corresponding UPC code below to access the SDS..
| Color | UPC Code |
|---|---|
| White | 61083642501 |
| Paintable Silicone Supreme Kitchen & Bath Sealant |  Tub & Tile Silicone 1® Sealant | Supreme Silicone Kitchen & Bath Sealant | |
|---|---|---|---|
| Water-ready Time | 30-minute | 24 Hours | 30-minute |
| Mold-Free Product Protections | 10-year | 7-year | Lifetime |
| Joint Movement | 50% | 25% | 50% |
| Paintable | |||
| Low Odor | |||
| Will Not Blemish Most High-End Metals | |||
| Available in Squeeze Tube |
Swipe to scroll the table horizontally